BW Technologies MicroClip XT Especificações descarregar pdf (Página 15)

GasAlertMicroClip XT

Technical Reference Guide

a Cautions

• For use only in potentially explosive atmospheres where oxygen concentrations do not exceed 20.9% (v/v).

• Any rapid up-scaling reading followed by a declining or erratic reading may indicate a gas concentration beyond upper scale limit,

which may be hazardous.

• Only calibrate the detector in a fresh air environment and in a safe area.

• Use only BW approved batteries for the GasAlertMicroClip XT detector. Refer to Specifications

• Charge the detector before first-time use. BW recommends the detector be charged after every workday.

• Charge the detector using the recommended charging adapter only. Do not use any other charging adapter. Failure to adhere to this

caution can lead to fire and/or explosion.

• Extended exposure of the detector to certain concentrations of combustible gases and air may stress a detector element that can

seriously affect its performance. If an alarm occurs due to high concentration of combustible gases, calibrate the detector. If necessary,

replace the sensor.

• Do not test the combustible sensor’s response with a butane cigarette lighter; doing so will damage the sensor.

• Do not expose the detector to electrical shock and/or severe continuous mechanical shock.

• Do not attempt to disassemble, adjust, or service the detector unless instructions for that procedure are provided in the technical

reference guide, and/or that part is listed as a replacement part. Use only BW Technologies by Honeywell replacement parts. Refer to

Replacement Parts and Accessories

• The detector warranty will be voided if customers, personnel, or third parties damage the detector during repair attempts. Non-BW

Technologies by Honeywell repair/service attempts void this warranty.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 73 74

Sem comentários

BW Technologies MicroClip XT Especificações Página 15